商品詳情

MR 轉子離心式制砂機 MR Rotor Centrifugal Crusher

 

一、 産品簡介 Product Description

MR 轉子離心式破碎機是一款配有立軸的高性能破碎🏒機 , 它适用于所有類型的礦物破碎和整形 : 從軟質物料到硬質物料 , 無論是低磨損還是極高磨損的材質。物料中的每個顆粒在雙腔式轉子中高速旋轉 , 然後甩向固定的反擊闆 , 反擊闆可由環形襯闆或由砂床組成 , 通過轉子和殼體的寬大尺寸設計在很大程度 , 避免了堵塞。而且該款制砂機大的優勢是整個轉子無焊接部分 ,; 所有耐磨防護爲單個可更換的易提件 ., 與多腔式設計相比 , MR 轉子離心式破碎機采用的雙腔式轉子中輸送的空氣更🛀🏻少 , 降低了能耗 , 所節省的能量可用于提高 , 産能 , 同時也降低了除塵裝置的功率 , 雙腔式轉子具有開放式結構設計 , 從而允許出料口的可用尺寸達到最大 ( 每側 89" ), 這樣顯著地降低了物料堵塞的風險 , 在 MR 雙腔式轉子中沿破碎腔會形成一個物料層 , 可作爲自身磨損保護。與傳統型轉子相比 , 所需磨損件比例降至最小 .

 

MR rotor centrifugal crusher is a high performance of vertical crusher. it applies to all types of mineral crushing and shaping: material from soft to hard material. the material of both low wear and high wear. Each particle in the material in the high speed rotating rotor double cavity, slammed to counterattack plate fixed. Counterattack plate can be made of annular plate or consists of a sand bed. Through the large size of the rotor and shell design to a great extent, to avoid the jams. And the big advantage is the whole rotor system sand machine welding parts, all wear protection for a single replaceable parts.Compared with multiple cavity design, MR rotor centrifugal crusher with double cavity of the rotor in the conveying air less and to reduce the energy consumption and save energy can be used to increase production capacity, but also reduce the power of the dust removal device.Double rotor cavity with open architecture design, allowing the discharging mouth of the maximum available size (89) on each side. This significantly reduce the risk of material jam.In MR double rotor cavity along the crushing cavity can form a layer of material, can be used as its own wear protection. Compared with the traditional rotor. the wear ratio fell to a minimum.

 

 

二、 産品特點 Product Features

 

·高品質的最終産品生産優質立方體型産品 , 利用離心力使進料的每個顆粒在轉子中獲得極大🍓的加速🐇度 , 物料抛出後與破碎闆碰撞。通過強大的沖擊力可💋使最終産品獲得極其理想的立方體形狀。

·質量穩定的最終産品即使設備在運行中不斷地産生磨✨損🍉 , 也絲毫不會影響物料的破碎效果。其系統特性能夠㊙️避免物料破碎時産生随機效應。這 1 也是 MR 轉子離心式破碎機不同于其它傳統破碎技術的特點㊙️ .

·有針對性的選擇性破碎通讨對每個物料顆粒針對㊙️性的沖💋擊破碎 , 使低強度成分的物料比高強度成分物料更容易被🤞破碎。這樣便可以有目的地去除掉易被破碎部分的🆚物料 , 從而顯著提高最終産品的質量 ( 磨耗值、抗凍性 ) 。對于由不同強度的成分組成的原礦及工業用礦物 . 可得到最大教量的最終産品 .

 

• High quality of the final product Produce the high quality cubic shape products,Use centrifugal force to make every feeding grain get the great accelerated speed The casted materials crush with crushing plate.

• The quality stable's final product Even if the equipment in operation cause abrasion continually, also doesn't affect the material's crush effect. The system features can avoid the random-effects by material crushing . This is Mr rotor centrifugal crusher's technology characteristics different from other traditional's.

• Targeted selective crushing For each material particles through targeted shock crushing,The low intensity component materials is easier crushed then high intensity component.in this way.it can remove the easy crushing part's materials on purpose,thus,significantly improve the quality of the final product(wear value.freezing resistance).For the different intensity of components of ores and industrial minerals. Can get the largest number's final product.

 

 

The annular plate structure / 環形襯闆

 

環形襯闆結構的典型應用範圍

·适用于使用中硬、中等磨耗性物料生産立方型骨料和制砂 , 例如使用礫石、石灰石、白雲岩、輝綠岩、玄武岩、安山岩⛹🏻‍♀️、碎磚塊、水泥熟料等 .

·選擇性破碎泥礫石以及其他礫岩、料、表土層等。

·回收利用瀝青和無鋼筋的混凝土塊等建築垃圾 . 中等磨耗的礦渣、工業礦 .

 

• It is suitable for medium abrasion resistance material production cubic stone and sand making, such as Gravel limestone. dolomite. diabase, basalt, andesite. brick bat cement clinker etc.

• Selective crushing mud gravel and other conglomerate , medium abrasion resistance material of slag and industrial mineral, topsoil, etc.

• Recycling asphalt , unreinforced concrete block and construction waste. etc.

 

The sand bed structure/ 砂床結構

砂床結構的典型應用範圍

·适用于使用高磨耗性物料生産立方型骨料和制🐪砂 , 例如使用礫石、花崗岩、斑岩、片麻(ma)岩、雜砂岩、石英石等 .

·破碎高磨耗性物料 , 例如 : 鋁釩土、矽鐵、磨料、玻璃等。

·有選搔地破碎例如來自鋼鐵廠、焚燒爐等的礦渣 .

 

• It is suitable for high abrasion resistance material production cubic stone and sand making, such as Gravel, granite and porphyry, gneiss, miscellaneous sandstone, quartz, etc .

• Crushing high abrasion materials, such as Aluminium vanadium and soil. ferrosilicon , abrasive , glass, etc

• Selectively crushing slag from steel plant, incinerator etc.

 

三、 技術參數  Technical Data

型号 Model	轉子大小 Rotor Size	圓周速度 Speed	進料粒度 Feed Size	通過能力 Through ability	功率 Power	重量 Weight	外形尺寸 Dimension
	D×H(mm)	(m/s)	(mm)	(t/h)	(kw)	(t)	(L×W×H)(mm)
MR0913	Φ930×135	60-89	45-56	30-75	75-160	7.5	3950×2400×2355
MR0922	Φ930×220	60-89	56-70	30-90	90-160	7.8	3950×2400×2355
MR1222	Φ1200×220	60-89	80-100	100-400	160-400	12.1	5080×2860×2675
MR1233	Φ1200×330	60-89	80-150	200-400	200-400	13.5	5080×2980×2825